One more leap

No abstract available.

Inhalation risk assessment of naphthalene emitted from deodorant balls in public toilets

The inhalation of naphthalene used as deodorant balls in public toilets could be an important cancer risk factor. The atmospheric concentration of naphthalene in public toilets (C(in)) was estimated both by a polyurethane foam passive air sampler (PUF-PAS) deployed in nine public toilets in Seoul, Korea and by a steady-state indoor air quality model, including emission estimation using Monte-Carlo simulation. Based on the estimated C(in), cancer risk was also assessed for cleaning workers and the general population. The steady-state C(in) estimated using the estimated emission rate, which assumed that air exchange was the only process by which naphthalene was removed, was much greater than the C(in) value measured using PUF-PAS in nine public toilets, implying the importance of other removal processes, such as sorption to walls and the garments of visitors, as well as decreased emission rate owing to wetting of the naphthalene ball surface. The 95 percentile values of cancer risk for workers based on the estimation by PUF-PAS was 1.6×10⁻⁶, whereas those for the general public were lower than 1×10⁻⁶. The results suggested that naphthalene deodorant balls in public toilets may be an important cancer risk factor especially for the cleaning workers.

One more leap

No abstract available.

Inhalation risk assessment of naphthalene emitted from deodorant balls in public toilets

The inhalation of naphthalene used as deodorant balls in public toilets could be an important cancer risk factor. The atmospheric concentration of naphthalene in public toilets (C(in)) was estimated both by a polyurethane foam passive air sampler (PUF-PAS) deployed in nine public toilets in Seoul, Korea and by a steady-state indoor air quality model, including emission estimation using Monte-Carlo simulation. Based on the estimated C(in), cancer risk was also assessed for cleaning workers and the general population. The steady-state C(in) estimated using the estimated emission rate, which assumed that air exchange was the only process by which naphthalene was removed, was much greater than the C(in) value measured using PUF-PAS in nine public toilets, implying the importance of other removal processes, such as sorption to walls and the garments of visitors, as well as decreased emission rate owing to wetting of the naphthalene ball surface. The 95 percentile values of cancer risk for workers based on the estimation by PUF-PAS was 1.6×10⁻⁶, whereas those for the general public were lower than 1×10⁻⁶. The results suggested that naphthalene deodorant balls in public toilets may be an important cancer risk factor especially for the cleaning workers.

Inhalation risk assessment of naphthalene emitted from deodorant balls in public toilets

The inhalation of naphthalene used as deodorant balls in public toilets could be an important cancer risk factor. The atmospheric concentration of naphthalene in public toilets (C(in)) was estimated both by a polyurethane foam passive air sampler (PUF-PAS) deployed in nine public toilets in Seoul, Korea and by a steady-state indoor air quality model, including emission estimation using Monte-Carlo simulation. Based on the estimated C(in), cancer risk was also assessed for cleaning workers and the general population. The steady-state C(in) estimated using the estimated emission rate, which assumed that air exchange was the only process by which naphthalene was removed, was much greater than the C(in) value measured using PUF-PAS in nine public toilets, implying the importance of other removal processes, such as sorption to walls and the garments of visitors, as well as decreased emission rate owing to wetting of the naphthalene ball surface. The 95 percentile values of cancer risk for workers based on the estimation by PUF-PAS was 1.6×10⁻⁶, whereas those for the general public were lower than 1×10⁻⁶. The results suggested that naphthalene deodorant balls in public toilets may be an important cancer risk factor especially for the cleaning workers.

Comparative study of oxidative stress caused by anthracene and alkyl-anthracenes in Caenorhabditis elegans

Oxidative stress was evaluated for anthracene (Ant) and alkyl-Ants (9-methylanthracene [9-MA] and 9,10-dimethylanthracene [9,10-DMA]) in Caenorhabditis elegans to compare changes in toxicity due to the degree of alkylation. Worms were exposed at 1) the same external exposure concentration and 2) the maximum water-soluble concentration. Formation of reactive oxygen species, superoxide dismutase activity, total glutathione concentration, and lipid peroxidation were determined under constant exposure conditions using passive dosing. The expression of oxidative stress-related genes (daf-2, sir-2.1, daf-16, sod-1, sod-2, sod-3 and cytochrome 35A/C family genes) was also investigated to identify and compare changes in the genetic responses of C. elegans exposed to Ant and alkyl-Ant. At the same external concentration, 9,10-DMA induced the greatest oxidative stress, as evidenced by all indicators, except for lipid peroxidation, followed by 9-MA and Ant. Interestingly, 9,10-DMA led to greater oxidative stress than 9-MA and Ant when worms were exposed to the maximum water-soluble concentration, although the maximum water-soluble concentration of 9,10-DMA is the lowest. Increased oxidative stress by alkyl-Ants would be attributed to higher lipid-water partition coefficient and the π electron density in aromatic rings by alkyl substitution, although this supposition requires further confirmation.

Thanks to our authors, reviewers, editors, and Prof. Ha

No abstract available.

Occurrence of microplastics in municipal sewage treatment plants: a review

Municipal sewage treatment plants (STPs) are thought to be important point sources of microplastics in freshwater systems and many peer-reviewed articles have been published on this issue since mid-2010s. In this review, we summarize existing literature on the occurrence of microplastics in STPs and experimental methods used for isolation and identification of microplastics. The number concentrations of microplastics in STP influents were 15.1-640 L⁻¹, whereas those in the STP effluents were highly variable and ranged from not detectable to 65 L⁻¹. For most of cases, conventional STPs are removing microplastics very effectively. Fragments and fibers are dominant shapes of microplastics. Thermoplastics (polyethylene and polypropylene) and polyester are the predominant materials recovered. Although further research is needed, size distribution of microplastics in STPs is likely to follow a power law, implying that different studies using different size cutoffs may be compared after establishing a power law relationship.

Thanks to our authors, reviewers, editors, and Prof. Ha

No abstract available.

Comparative study of oxidative stress caused by anthracene and alkyl-anthracenes in Caenorhabditis elegans

Oxidative stress was evaluated for anthracene (Ant) and alkyl-Ants (9-methylanthracene [9-MA] and 9,10-dimethylanthracene [9,10-DMA]) in Caenorhabditis elegans to compare changes in toxicity due to the degree of alkylation. Worms were exposed at 1) the same external exposure concentration and 2) the maximum water-soluble concentration. Formation of reactive oxygen species, superoxide dismutase activity, total glutathione concentration, and lipid peroxidation were determined under constant exposure conditions using passive dosing. The expression of oxidative stress-related genes (daf-2, sir-2.1, daf-16, sod-1, sod-2, sod-3 and cytochrome 35A/C family genes) was also investigated to identify and compare changes in the genetic responses of C. elegans exposed to Ant and alkyl-Ant. At the same external concentration, 9,10-DMA induced the greatest oxidative stress, as evidenced by all indicators, except for lipid peroxidation, followed by 9-MA and Ant. Interestingly, 9,10-DMA led to greater oxidative stress than 9-MA and Ant when worms were exposed to the maximum water-soluble concentration, although the maximum water-soluble concentration of 9,10-DMA is the lowest. Increased oxidative stress by alkyl-Ants would be attributed to higher lipid-water partition coefficient and the π electron density in aromatic rings by alkyl substitution, although this supposition requires further confirmation.

Occurrence of microplastics in municipal sewage treatment plants: a review

Municipal sewage treatment plants (STPs) are thought to be important point sources of microplastics in freshwater systems and many peer-reviewed articles have been published on this issue since mid-2010s. In this review, we summarize existing literature on the occurrence of microplastics in STPs and experimental methods used for isolation and identification of microplastics. The number concentrations of microplastics in STP influents were 15.1-640 L⁻¹, whereas those in the STP effluents were highly variable and ranged from not detectable to 65 L⁻¹. For most of cases, conventional STPs are removing microplastics very effectively. Fragments and fibers are dominant shapes of microplastics. Thermoplastics (polyethylene and polypropylene) and polyester are the predominant materials recovered. Although further research is needed, size distribution of microplastics in STPs is likely to follow a power law, implying that different studies using different size cutoffs may be compared after establishing a power law relationship.

Ecological Risk Assessment of Chemicals Migrated from a Recycled Plastic Product

OBJECTIVES: Potential environmental risks caused by chemicals that could be released from a recycled plastic product were assessed using a screening risk assessment procedure for chemicals in recycled products. METHODS: Plastic slope protection blocks manufactured from recycled plastics were chosen as model recycled products. Ecological risks caused by four model chemicals -di-(2-ethylhexyl) phthalate (DEHP), diisononyl phthalate (DINP), cadmium (Cd), and lead (Pb)- were assessed. Two exposure models were built for soil below the block and a hypothetic stream receiving runoff water. Based on the predicted no-effect concentrations for the selected chemicals and exposure scenarios, the allowable leaching rates from and the allowable contents in the recycled plastic blocks were also derived. RESULTS: Environmental risks posed by slope protection blocks were much higher in the soil compartment than in the hypothetic stream. The allowable concentrations in leachate were 1.0x10(-4), 1.2x10(-5), 9.5x10(-3), and 5.3x10(-3) mg/L for DEHP, DINP, Cd, and Pb, respectively. The allowable contents in the recycled products were 5.2x10(-3), 6.0x10(-4), 5.0x10(-1), and 2.7x10(-1) mg/kg for DEHP, DINP, Cd, and Pb, respectively. CONCLUSIONS: A systematic ecological risk assessment approach for slope protection blocks would be useful for regulatory decisions for setting the allowable emission rates of chemical contaminants, although the method needs refinement.

Maintaining the Constant Exposure Condition for an Acute Caenorhabditis elegans Mortality Test Using Passive Dosing

OBJECTIVES: Maintaining the constant exposure to hydrophobic organic compouds in acute toxicity tests is one of the most difficult issues in the evaluation of their toxicity and corresponding risks. Passive dosing is an emerging tool to keep constant aqueous concentration because of the overwhelming mass loaded in the dosing phase. The primary objectives of this study were to develop the constant exposure condition for an acute mortality test and to compare the performance of the passive dosing method with the conventional spiking with co-solvent. METHODS: A custom cut polydimethylsiloxane (PDMS) tubing loaded with benzyl butyl phthalate (BBP) was placed in each well of a 24-well plate containing assay medium. The rate of the release of BBP from PDMS was evaluated by measuring the change in the concentration of BBP in the assay medium. The efficiency of maintaining constant exposure condition was also evaluated using a simple two-compartment mass transport model employing a film-diffusion theory. An acute mortality test using 10 C. elegans in each well was conducted for the evaluation of the validity of passive dosing and the comparative evaluation of the passive dosing method and the conventional spiking method. RESULTS: Free concentration in the assay medium reached 95% steady state value within 2.2 hours without test organisms, indicating that this passive dosing method is useful for an acute toxicity test in 24 hours. The measured concentration after the mortality test agreed well with the estimated values from partitioning between PDMS and the assay medium. However, the difference between the nominal and the free concentration became larger as the spiked concentration approached water solubility, indicating the instability of the conventional spiking with a co-solvent. CONCLUSIONS: The results in this study support that passive dosing provides a stable exposure condition for an acute toxicity test. Thus, it is likely that more reliable toxicity assessment can be made for hydrophobic chemicals using passive dosing.